In making urethane panels, nothing is left for granted. Our urethane
panels are design and build in heated molds, in which the panels are foamed-inplace
precisely and accurately. The
prime insulation built into those panels provides dimensional stability for a
businesses wide range of temperatures use.
Standard Urethane Panel
4”, 5” or 6” thick
(Facing inside) |
|
1. Outside skins are available in white polyester
over smooth galvanized, white polyester or sand-tan
polyester over embossed galvanized, embossed
aluminum, embossed Galvalume® or stainless steel.
Optional finishes in a spectrum of custom colors
are also available, as are Sandex sand-textured finishes.
2. Wash primer for optimum foam adhesion.
3. Foamed-in-place urethane insulation, (poured, not frothed).
4. Tongues and grooves on panel edges are
accurately molded urethane.
5. Cam-action Speed-lok joining mechanism for
snug joints.
6. Heavy-gauge steel straps connect locking
arms with locking pins on opposite edges of
each panel.
7. Inside skins are available in white polyester
over smooth or embossed galvanized,
embossed aluminum, embossed Galvalume or
stainless steel.
8. Interior metal floor panel skin. Heavy-gauge
galvanized steel or optional stainless steel.
9. Exterior metal floor panel skin. Usually
supplied in same finish as vertical panels.
Edges capped with matching metal when
stainless steel or white over galvanized steel
are specified for verticals. |
